CLICK HERE TO SELECT YOUR VEHICLE
SELECT YOUR VEHICLE
YOU MAY ALSO LIKE
Dealer Price: $185.00
Our Price: $34.95
Our Price: $19.99
Our Price: $4.95
Our Price: $5.95
Our Price: $2.95
PART SKU: FRD-164-R8094-REF2019 Lincoln MKT Smart Remote Key 5 button - refurbished with emergency insert key. If you have two working remotes for your car, you can program this new key fob by yourself (scroll down for the programming instructions). If you do not have two working transmitters, this smart remote must be programmed by Ford dealer or local car locksmith (you can look it up here: Locksmith Search ). The emergency key must be cut during programming as well. Quoted above is an average dealer price not including programming of this keyfob.
Note: This item has been used previously. It may have some signs of cosmetic wear and imperfections, but is fully operational and functions as intended. Picture shown is a stock photo of a New Remote.
Lincoln OEM PN: 164-R8094, 164R8094, 5921288, 5931757, FL7T-15K601-BA ,BA1T-15K601-EC, BA1Z-15K601-E
FCC ID: M3N5WY8609
Frequency: 315 MHz
Emergency insert key same as: 164-R8041, 164R8041 and Strattec 5912345
On Board Programming: Yes, two working remotes required
This remote also fits:
13 14 15 16 17 Lincoln Navigator
13 14 15 16 Lincoln MKS
13 14 15 16 17 18 19 20 Lincoln MKT
11 12 13 14 15 Lincoln MKX
DIY PROGRAMMING INSTRUCTIONS: Lincoln MKT
You must have two previously programmed intelligent access keys inside the vehicle and the new unprogrammed intelligent access keys readily accessible. If two previously programmed keys are not available, you must take your vehicle to your authorized dealer to have the spare key(s) programmed.
Ensure that the vehicle is off before beginning this procedure. Ensure that all doors are closed before beginning this procedure and that all doors remain closed throughout the procedure. Perform this procedure exactly as described below, and perform all steps within 30 seconds of starting the sequence. If any steps are performed out of sequence, stop and wait for at least one minute before starting again.
1. Place the new unprogrammed intelligent access key in the pocket inside of the center console.
2. Press the driver or passenger power door unlock control three times.
3. Press and release the brake pedal one time.
4. Press the driver or passenger power door lock control three times.
5. Press and release the brake pedal one time. The indicator on the Start/Stop button should begin to rapidly flash, indicating that programming mode has been entered and two programmed intelligent access keys have been detected in the vehicle.
6. Within one minute, press the Start/Stop button. A message will be displayed on the message center indicating that the new intelligent access key was programmed. If four intelligent access keys have already been programmed to your vehicle, you cannot program anymore and the message MAX # OF KEYS LEARNED will be displayed on the message center.
7. Remove the intelligent access key from the center console pocket and press the unlock button on the newly programmed intelligent access keys to exit programming mode.
8. Verify that the remote entry functions operate (press lock then unlock, making sure you end in unlock) and that the vehicle starts with new intelligent access key. If the intelligent access key has been successfully programmed, it can be used to activate the intelligent access with push button Start feature and can be used to start your vehicle.
- One refurbished Lincoln remote
- One free emergency insert key
- All transmitters include a battery
- All units are tested before we ship
- 6 months 100% satisfaction guarantee and warranty, money back policy included
HOW TO VIDEOS
How to Fix Broken Car Keyless Entry Remote Keyfob Plastic Case