Keyless Entry Remote Key for 2016 Chevrolet Cruze - new condition. Free do it yourself programming instructions are NOT included with the purchase of this part. Please note that this key fob remote key combo will have to be cut and programmed to match your doors and ignition by a local GM dealer or pro automotive locksmith.
Price above is quoted for one replacement 2016 Chevrolet Cruze keyless entry unit. This key fob will only operate on vehicles already equipped with a standard GM factory keyless entry system. If you are not sure about that please contact us via email or your local dealer parts department to find out based on the VIN# of your vehicle.
All controls include a battery, are tested before shipped and are covered with 1 year 100% satisfaction guarantee and warranty
Quoted above is an average dealer price not including programming of this keyfob. ******** VERY IMPORTANT********** . There are 2 identical keys available that year. There is a few ways to find out which remote you need. 1. Check the frequency of the remote when you press a button. Remotes with FCC ID LXP-T004 (which can be found under the back cover) work on 433 MHz. Remotes with FCC ID LXP-T003 work on 315 MHz. 2. Locate your GM RPO sticker, also called the Service Parts Identification - sample picture above. Label is usually located in spare tire compartment under trunk floor trim panel or on the front door pilar. On the label you will find code the proper code- XL7 or XL8. The vehicles that were built with the XL7 system have been notified by GM to be brought in to be boosed to XL8 system due to weak signal problems. The dealer SHOULD change the code on the SPID label after change. 3. Simply open the back of your remote cover with a screw driver to find the FCC ID on the back of the remote. You will need a magnifying glass to read the code.
XL7 system remote has FCC: LXP-T003 OEM GM PN 13588756 315 MHz signal. Fits 16 Chevrolet Cruze XL8 system remote has FCC: LXP-T004 OEM GM PN 13514135 433 MHz signal Also fits: