CLICK HERE TO SELECT YOUR VEHICLE

1991 Buick Roadmaster Keyless Entry Remote Fob Smart Key Programming Instructions

How to Program a 1991 Buick Roadmaster Key Fob, Keyless Entry Remote, Smart Key





Programming Instructions Step by Step:

1. Have both remotes that will be matched to the car present, even if only is new. Remove the keys from the ignition and have them in your possession.

2. Open the trunk and pull back the trunk side carpet on the passenger side. Locate a single plug connector hangingfrom the wire harness. This is the "Program Connector"

3. Use a jumper wire with alligator clips at both ends to groundthe program connector to a bolt such as antenna bolt. Groundingthe program terminal erases the system memory and causesthe doors to lock and unlock once.

4. Keeping the jumper wire connected press any button on first remote. The vehicle will respond by door locks locking and unlocking. If you have a second remote to program press anybutton on it and the doors locks will lock and unlock again.

5. Remove jumper wire and test remotes.

Use our Locksmith Search if you need professional help.
Back to blog