How to Program a 1993 Oldsmobile Achieva Keyless Entry Remote Fob
Programming Instructions Step by Step:1.Locate theprogramming connector located in the LH trunk. Trim mayhave to be pulled back to access programming connector. (Connectorhas wires leading up to it and it is not connected to anything.)
2. Jump programming connector terminals. Leave terminals jumpeduntil step6.
3. System should now lock and unlock doorsto indicateprogramming mode has been entered.
4. Press any button on keyless remote once. System should now lock and unlock doors, indicatingsuccessfulprogramming of keyless remote.
5. Repeat step 4 for additional remote or other existing keyless remote.NOTE:A maximum of only two Keyless Remotes can be programmed.
6. Remove programming connector jumper wire to exit programming mode.
7. Test remote(s).
Use our Locksmith Search if you need professional help.