How to Program a 1993 Pontiac Bonneville Key Fob, Keyless Entry Remote, Smart Key
Programming Instructions Step by Step:DATA LINK CONNECTOR
1. Locate the Data Link Connector (DLC) underneath the driver's side dashboard. Use the figure asa map for your DL ( They are not lettered on your vehicle.) The view is looking straight into thecavitiesof the DLC.
2. Connect cavity G withcavityAusing a fused jumper wire.Your vehicle will respond by locking and unlocking the door locks within 2 seconds.
3. Press any button 3 times in successtion on first remote to be programmed. Locks will lock and unlock verifying remote wasprogrammed.
4. Press any button 3 times in succession on second remote to be programmed if applicable.Locks will lock and unlock to verifyremote was programmed.
5.Remove jumper wire and test remote(s)
Use our Locksmith Search if you need professional help.