1995 GMC Jimmy Keyless Entry Remote Fob Programming Instructions

How to program a 1995 GMC Jimmy Keyless Entry Remote Fob

Step by Step How to Programming Instructions1. Locate the red two wired programming connector located near the centrallocking control module. behind LH Lower instrument panel

2. Inside the Red programming connector you will see to pins..Jumptwo pins with a section of wire.

3. System should now lock and unlockdoors to indicate vehicle has enteredprogramming mode.

4. Press any button onkeyless remote once. System should now lock and unlockdoors indicating the keyless remote hasbeen programmed.

5. Repeat step4 to program other remote.

6. Remove jumper wire from programming connector to exitprogramming mode.

7. Test Remote(s)

Use our Locksmith Search if you need professional help.