How to Program a 1995 GMC Sonoma Keyless Entry Remote Fob
Programming Instructions Step by Step:1. Locate the red two wired programming connector located near the central locking control module behind LH Lower instrument panel.
2. Jump Programming connector terminals.
3. System should now lock and unlockdoors to indicate vehicle has entered programming mode.
4. Press any button onkeyless remote once. System should now lock and unlockdoors indicating the keyless remote hasbeen programmed.
5. Repeat step4 to program other remote.
6. Remove jumper wire from programming connector to exitprogramming mode.
7. Test Remote(s)
Use our Locksmith Search if you need professional help.