How to Program a 1996 Chevrolet Monte Carlo Key Fob, Keyless Entry Remote, Smart Key
Programming Instructions Step by Step:
Note: Existing keyless remotes will be erased with this procedure. Existing working remotes will have to reprogrammed also.
1. Locate the programming connector wire located in the RH trunk area. Youmay have to pull back right side trunk trimon trunk wall to locatethesingle black/white wire.
2.The programming connector wire should have one terminal in the plasticconnector on end of black/white wire. Ground the terminal in the connector to a nearby bolt or trunk latch. Leave connector wire connected to ground through out procedure.
3. System will now lock and unlock doors automatically to indicateprogramming mode has been activated.
4. Press any button on keyless remote.System will respond by lockingand unlocking doors one time to indicate successful programming.
5. Repeat step 4 forto program any additional keyless remotes including and existingkeyless remotes. Do not remove ground wire between programming of keyless remotes.
6. Disconnect programming connector wire from groundto exit programming mode.
7. Testkeyless remote(s).
Use our Locksmith Search if you need professional help.