How to Program a 1996 Oldsmobile Bravada Keyless Entry Remote Fob
Programming Instructions Step by Step:Note: It is possible you will have to use 1997 instructions depending when your 1996 Bravada was built.1. Locate the red two wired programming connector located near the centrallocking control module. behind LH Lower instrument panel2. Jump Programming connector terminals.
3. System should now lock and unlockdoors to indicate vehicle has enteredprogramming mode.
4. Press any button onkeyless remote once. System should now lock andunlockdoors indicating the keyless remote hasbeen programmed.
5. Repeat step4 to program other remote.
6. Remove jumper wire from programming connector to exitprogramming mode.
7. Test Remote(s)
Use our Locksmith Search if you need professional help.