How to Program a 1996 Pontiac Grand Am Key Fob, Keyless Entry Remote, Smart Key
Programming Instructions Step by Step:1. Access the programming connector located in the LH trunk. Trim may have to be pulled back to access programming connector. ( Connector has wires leading up to it and it is not connected to anything.)
2. Jump programming connector terminals.
3. System should now lock and unlock doorsto indicateprogramming mode has been entered.
4. Press any button on keyless remote once.System should now lock and unlock doors, indicating
successfulprogramming of keyless remote.
5. Repeat step 4 for additional remote or other existing keyless remote.
NOTE:A maximum of only two Keyless Remotes can be programmed.
6. Remove programming connector jumper wire to exit programming mode.
7. Test remote(s).
Use our Locksmith Search if you need professional help.