CLICK HERE TO SELECT YOUR VEHICLE

1997 Acura CL Keyless Entry Remote Fob Programming Instructions

How to Program a 1997 Acura CL Keyless Entry Remote Fob

Programming Instructions Step by Step:

1. Turn the ignition switch on (II on the ignition)

2. W/in 1-4 seconds, push the transmitter lock or unlock button with the transmitter aimed at the keyless receiver unit. (Just at the steering wheel is fine)

3. W/in 1-4 seconds, turn the ignition switch off

4. W/in 1-4 seconds, turn the ignition switch on(II)

5. W/in 1-4, push the transmitter lock or unlock button w/ the transmitter aimed at the receiver again.

6. W/in 1-4 seconds, turn the ignition switch off

7. W/in 4 seconds, turn the ignition switch On(II)

8. w/in 1-4 seconds, push the transmitter lock or unlock again.

9. w/in 4 sec, turn the ignition off

10. w/in 4 sec, turn the ignition ON

11. W/in 1-4, push the transmitter again

12. Confirm you can hear the sound of the door actuators. W/in 1-4 seconds, push the trans lock or unlock button again.

13. W/in 10 seconds, aim the transmitters (up to three) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored.

14. Turn the ignition switch off, and pull out the key.

15. Confirm proper operation with the new codes

Use our Locksmith Search if you need professional help.
Back to blog