How to Program a 1997 Chevrolet Venture Key Fob, Keyless Entry Remote, Smart Key
Programming Instructions Step by Step:1. Remove key from ignition switch.
2. Remove the MALL PGM fuse, from fuse box
3. Close all doors.
4. Turn ignition switch to ACC.
5. Within 1 second turn the ignition switch to OFF then back to ACC
6. Open and close drivers door.
7. A chime will sound indicating you are in programming mode.
8. Press and hold the LOCK and UNLOCK buttons togetheruntil chime sounds twice, about 14 seconds.
9. Repeat step 8 for any additional remotes.
10. Remove key from ignition and replace MALL PGM fuse.
11. Test remotes.
Use our Locksmith Search if you need professional help.