How to Program a 1997 Honda CR-V Keyless Entry Remote Fob
Programming Instructions Step by Step:Note:
Entering the programming mode cancels all learned keyless remotes,so none of the previously programmedremotes will work. You mustreprogram all of the keyless remotes once you are in the programming mode.
You must complete each step within 5 seconds of the previous step tokeep the system from exitingthe programming mode.
1. Turn ignition switch to ON (II)
2. Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for thisstep.)
3. Turn ignition switch to LOCK (0)
4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used in step 2
5. Turn the ignition switch to ON (II)
6. Press the LOCK or UNLOCK button the same remote.Make sure the power door locks cycle to confirmyouare in programming mode.
7. Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycleafter youpush each remote button to confirm system has accepted the remote.
8. Turn the ignition switch to LOCK (0) to exit programming mode.
9. Test remote(s)
Use our Locksmith Search if you need professional help.