How to Program a 1998 Chevrolet Silverado Key Fob, Keyless Entry Remote, Smart Key
Programming Instructions Step by Step:
1. Locate the Data Link Port. It is located under dash drivers side.Be sure you know which pins are 8 and4.
2. Make sure there are metal contact pins in terminals 8 and4.Connect 8 to 4 with a suitable jumper wire (leave the jumperwire connected throughout the programming procedure).Make sure you know which terminals are 8 and4. The vehicle will respond by locking and unlocking the doors to signifyentering of programming mode.
3. Press and hold both the LOCK and UNLOCK buttons together on the first transmitter to be programmed. Afterabout 15 seconds, the vehicle will respond by locking and unlocking the doors. Release the buttons on the transmitter.
4. Within one minute, repeat the previous step on the remaining transmitters to be programmed.
5. Remove jumper wire applied to the OBDII Port.
Use our Locksmith Search if you need professional help.