How to Program a 1998 Lexus ES300 Key Fob, Keyless Entry Remote, Smart Key
Programming Instructions Step by Step:1. Keep driver door open and all other doors closed. Make sure doors are unlocked and key is out of the ignition.2. Insert key into the ignition and pull out. Do not turn or start vehicle. Just put key in and pull out..3. Perform these steps within 40 seconds. A. Using the power lock switch on the drivers door, perform 5 lock/unlock cyclesstarting with lock. Use an even pace and try to go about one cycle per second.(1Cycle = 1 lock and 1 unlock). B. Close the drivers door, then open the drivers door.4.Perform these steps within 40 seconds.A. Using the power lock switch on the drivers door, perform 5 lock/unlock cyclesstarting with lock. Use an even pace and try to go about one cycle per second.(1Cycle = 1 lock and 1 unlock). B. Insert the key in the ignition cylinder. C. Turn the ignition to ON (Do NOT Start) then back to OFF. D. Remove the key from the ignition.5. Press any button on remote for a minimum of 1 second.System should now lock and unlock doors once.6. Close and open drivers door.7. Press any button on remote for a minimum of 1 second. System should now lock andunlock doors. Once to confirm programming, twice to indicate programming failed.8. Repeat steps 5, 6 and 7 for additional remotes.
Use our Locksmith Search if you need professional help.