Programming Instructions for 1998 Lincoln Mark VIII Remote Fob
1. Enter 5-digit permanent entry code into the keyless entry pad located on the driver's door.2. Within 5 seconds of pressing last button of code, press the 1/2 button on the entry pad.
All doors will lock then unlock confirming you are in programming mode.
3. Press any button on first Keyless Remote within 5 seconds of pressing
the 1/2 button. Locks will cycle to indicate successful programming.
4. Press any button on second keyless remote within 5 seconds of
previous remote. Locks will cycle again to indicate successful programming.
5. Repeat step 4 for all the remaining remotes (including working remotes).
6. Press the 7/8 and the 9/0 buttons simultaneously on the keypad to exit program
mode.
Note: The 5 digit permanent code is located: on the owner's warranty card, on a label inside the trunk lid, the on the owner's code card, on the central locking control module located in the driver's door.
Key Programming Information for 1998 Lincoln Mark VIII
Use our Locksmith Search if you need professional help.