How to Program a 1998 Nissan Maxima Keyless Entry Remote Fob
Programming Instructions Step by Step:1.Close and lock all doors with the driver's side power lock/unlock switch.
2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. YourHazard Lamps will flash if you have performed this step successfully. (Withdraw key completely fromignition cylinder each time ). If this procedure is performed too fast, system will not enter programming mode.
3.Insert key into the ignition cylinder and turn to the ACC position.
4. Within 5 seconds, pushLOCK button on the keyless remote. Your Hazard Lamps should flash.(Do not pressthe button more than one time in the above step). If the button is pressed more than one time, theprogramming procedure will not be successful.
5.If there are any remainingremotes (including the old ones), unlock then lock all doors using the driver's side power lock/unlock switch and within 5 seconds, pushLOCK button on the next remote. Your HazardLampsshould flash. Repeat this step for eachkeyless remote(including any existing keyless remotes).
6.Turn the key to the OFF position, remove keys from the ignition, Opendoor, Test Remotes
Use our Locksmith Search if you need professional help.