1999 Dodge Ram 2500 Key Fob, Keyless Entry Remote, Smart Key
Programming InstructionsUp to four remotes can be programmed. When programming a new remote, all remotes intended for use with this vehicle, except the remote used to start the programming mode, must be programmed within the 30 second programming mode.1. Turn the ignition switch to the ON position (Do not start vehicle just go to position as far as you can without starting engine).2. Press and hold the unlock button on a currently programmed remote for a minimum of 4 seconds and a maximum of 10 seconds. While pressing the unlock button, press and release the panic button. Release the unlock button and a single chime will sound. This indicates that the vehicle is in programming mode.3. Within 30 seconds, press and release the lock or unlock button on all remotes intended for use with this vehicle except the remote used to start the programming mode. Successful programming will be indicated by a single chime.NOTE: When programming mode is entered, programming is cleared from programmed remotes and the remotes will need to be reprogrammed.Use our Locksmith Search if you need professional help.