Programming Instructions for 1999 Volkswagen Jetta Remote Fob
Obtain all remote transmitters for this vehicle. You will need two keys to perform this programming procedure.NOTE: the following procedure only programs the remote buttons. It does not program the key to start the car. You must have the key programmed at a dealer or locksmith.
1.Insert master key into the ignition switch and turn the ignition switch to the ON position.
2. Within 30 seconds: Insert 2nd key into the driver's door lock cylinder and manually lock the driver's door with the 2nd key.
3.Press the LOCK or UNLOCK button
4.After 2 seconds press the LOCK or UNLOCK button again
5.Switch ignition to the OFF position. Programming is now complete, test remote to ensure proper function
Key Programming Information for 1999 Volkswagen Jetta
Do-It-Yourself programming procedure is not available for this vehicle. This vehicle requires a diagnostic equipment to be connected to the vehicle to program the key. You will need to find a local automotive locksmith or a dealer to program this key.Use our Locksmith Search if you need professional help.