How to Program a 2000 Cadillac Escalade Key Fob, Keyless Entry Remote, Smart Key
Programming Instructions Step by Step:
Note: All working remotes will be erased when you enter programming mode. All remotes youwant towork with this vehicle will have to be reprogrammed at this time.
1. Turn ignition to Run position, then back to OFF.
2. Remove Radio Fuse (Fuse #17)
3. Turn ignition from OFF to RUN position three times quickly within 5 seconds. The vehicle willrespond bylocking the doors, unlocking drivers door and releasing thetailgate or panel doors.
4. Press and hold the LOCK and UNLOCK buttons at the same time until for 15 seconds or until you hear cycle.
5. Repeat step 4 for each additional remote you want to program up to 4 remotes.
6. Replace Radio fuse and test remotes.
Use our Locksmith Search if you need professional help.