How to Program a 2001 Mazda MPV Keyless Entry Remote Fob
Programming Instructions Step by Step:1. Remove key from ignition.
2.
Close all doors.
3.Open driver side door and leave open.
4. Perform the following steps within 24 seconds.
a. Insert key in ignition.
b. Turn key to ON and OFF.
c. Repeat step b two more times.
d. Remove key.
e. Push driver door frame button three times (black rubber button located on driver door frame that tell the vehicle whether or not door is closed.)
5. Buzz sound,chimeordoors will lock and unlockshould be heard at this point signaling that the vehicle is nowin programming mode. If not, wait 40 seconds and return to step4.
6. All transmitters need to be programmed at this time, including the old ones. Push any button on the transmittertwo times. A buzz sound, chime or doors locking and unlockingshould be heard at this point signaling that thevehicle has accepted the new transmitter code. If there is only one transmitter, repeat this step two more times
using the only transmitter. If there are two transmitters, repeat this step two more times using the secondtransmitter.
7. Push driver door frame button one time. Two buzz sounds, chimes or doors locking and unlocking 2 timesshouldbe heard at this point signaling successful programming.
Use our Locksmith Search if you need professional help.