CLICK HERE TO SELECT YOUR VEHICLE

2004 Honda Odyssey Keyless Entry Remote Fob Programming Instructions

How to Program a 2004 Honda Odyssey Keyless Entry Remote Fob

Programming Instructions Step by Step:

1. Turn ignition switch to ON (II)

2. Within 4 seconds press the LOCK or UNLOCK button on one of the remotes.Make sure remote is aimed at the receiver near the glove box.

3. Within 4 seconds turn ignition switch to LOCK (0)

4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used in step2.

5. Within 4 seconds turn the ignition switch to ON (II)

6. Within 4 seconds press the LOCK or UNLOCK button the same remote. Makesure the power door locks cycle to confirmyou are in programming mode.Press the LOCK or UNLOCK button again.

7. Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after youpush each remote button to confirm system has accepted the remote.

8. Turn the ignition switch to LOCK (0) to exit programming mode.

9. Test remote(s).

Use our Locksmith Search if you need professional help.
Back to blog