2006 Ford Econoline Keyless Entry Remote Fob Programming Instructions

How to Program a 2006 Ford Econoline Keyless Entry Remote Fob

Programming Instructions Step by Step:Note: You can program up to 4 remotes to this vehicle

1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Doorlocks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again toconfirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Tip: If you are not successful getting in to programming mode with drivers door closed. Try again with drivers door open.

Use our Locksmith Search if you need professional help.