How to Program a 2014 Ford F250-550 Super Duty Key Fob, Keyless Entry Remote, Smart Key
Step by Step How to Program Instructions:
A maximum of eight keys can be programmed to your vehicle. Only SecuriLock keys can be used. To program a key yourself, you will need two previously programmed keys (keys that already operate your vehicle's engine) and the new unprogrammed key(s) readily accessible for timely implementation of each step in the procedure.
Please read and understand the entire procedure before you begin.
1. Insert the first previously programmed key into the ignition and turn the ignition from the OFF position to the ON position (maintain ignition in the ON position for at least one
second, but no more than 10 seconds).
2. Turn ignition from the ON position back to the OFF position in order to remove the first programmed key from the ignition.
3. After three seconds but within 10 seconds of removing the first previously programmed key, insert the second previously programmed key into the ignition and turn the ignition from the OFF position to the ON position (maintain ignition in the ON position for at least one second but no more than 10 seconds).
4. Turn the ignition from the ON position back to the OFF position in order to remove the secondprogrammed key from the ignition.
5. After three seconds but within 10 seconds of removing the second programmed key, insert the new unprogrammed key (new key/valet key) into the ignition and turn the ignition from the OFF position to the ON position (maintain ignition in the ON position for at least one second, but no more than 10 seconds). This step will program your new key to a programmed key.
6. To program additional new unprogrammed key(s), repeat Steps 1 through5.
If successful, the new programmed key(s) will start the vehicle's engine and operate the remote portion of the key.
If you have one working key, Click Here to Buy Programmer.
Use our Locksmith Search if you need professional help.