CLICK HERE TO SELECT YOUR VEHICLE

2015 Chevrolet Spark Keyless Entry Remote Fob Smart Key Programming Instructions

How to Program a 2015 Chevrolet Spark Key Fob, Keyless Entry Remote, Smart Key



Programming Instructions Step by Step:

Programming with a Recognized Transmitter

1. Insert the original, already programmed key in the ignition and turn the key to the ON/RUN position.

2. Turn the key to LOCK/OFF, and remove the key.

3. Insert the new key to be programmed and turn it to the ON/RUN position within five seconds. The security light will turn off once the key has been programmed.

4. Repeat Steps 13 if additional keys are to be programmed.

Programming without a Recognized Transmitter

Program a new key to the vehicle when a recognized key is not available. Canadian regulations require that owners see their dealer. If there are no currently recognized keys available, follow this procedure to program the first key. This procedure will take approximately 30 minutes to complete for the first key. The vehicle must be off and all of the keys you wish to program must be with you.

1. Insert the new vehicle key into the ignition.

2. Turn to ON/RUN. The security light will come on.

3. Wait 10 minutes until the security light turns off.

4. Turn the ignition to LOCK/OFF

5. Repeat Steps 24 two more times. After the third time, turn to ON/RUN; the key is learned and all previously known keys will no longer work with the vehicle. Remaining keys can be learned by following the procedure in Programming with a Recognized Transmitter.

Use our Locksmith Search if you need professional help.
Back to blog