How to Program a 2019 Lincoln MKZ Key Fob, Keyless Entry Remote, Smart Key
Step by Step How to Program Instructions:
Programming spare intelligent access key.
You must have two previously programmed keys and the new unprogrammed key readily accessible. If you do not have two previously programmed keys you will need a Locksmith to cut and program a second key.
1. Remove the rubber covering in the cupholder. Place the first programmed key in the backup slot at the bottom of the cupholder. Press the START/STOP button.
2. Wait 5 seconds, and then press the START/STOP button.
3. Remove the intelligent access key.
4. Within 10 seconds, place a second programmed intelligent access key in the backup slot and press the START/STOP button
5. Wait 5 seconds, and then press the START/STOP button again.
6. Remove the intelligent access key.
7. Wait 5 seconds, then place the unprogrammed intelligent access key in the backup slot and press the START/STOP button.
8. Programming is now complete. Verify the remote control functions operate and your vehicle starts with the new intelligent access key.
If programming was not successful, wait 10 seconds and repeat Steps 1 through 7
Use our Locksmith Search if you need professional help.