Aftermarket Set - Remote for GM 10335582 + B97 Key

• One bundle Remote 10335582 for GM + B97 Key - brand new, aftermarket set.


• DIY remote programming instructions are free and included with the purchase. You can program this key fob by yourself after you receive it.


• This ignition key must be professionally cut when received by a local automotive locksmith (click here for Locksmith Search ) or hardware store. Proof of ownership for your vehicle will most likely be required (like title, registration, insurance card) to make sure you are the owner or authorized user. You can program this key at home using your existing working key (scroll down for programming instructions). Cutting only will NOT allow you to start the engine.


• Price above is quoted for one replacement keyless entry set (remote + key).


• WE DO NOT CUT OR PROGRAM REMOTE KEYS AT OUR FACILITY. Please contact your car locksmith for pricing.

---

More Information:

• Aftermarket Remote Part Numbers: 10335582 , 10335582-88
• FCC ID: L2C0007T
• Frequency: 315 MHz
• Battery: CR2032
• Reusable: Yes
• On Board Programming: Yes
• 4 Buttons: Lock, Unlock, Trunk release, Panic alarm
• Aftermarket GM Ignition Transponder Key B97
• Chip ID: MEGAMOS 13
• Strattec: 690552, 690554
• OEM: 88891799, 89024245, 15289762
• A1: B97SP
• Bianchi: BB97PT
• Hata: B-97-HPT
• Ilco: B97-PT
• JET: B97-PHT
• Hillman: 86660
• Test Key: B93
• Code Series: S000A-S711K
• Groove: 75

---

This set fits the following vehicles:

01 02 03 04 05 Buick Century
01 02 03 04 05 Buick Regal
01 02 03 04 05 06 07 Buick Rendezvous
01 02 Oldsmobile Intrigue
01 02 03 04 05 Pontiac Aztek
01 02 03 Pontiac Grand Prix

---

Ignition Key Programming Instructions:

ALL KEYS LOST/MISPLACED
1. Insert the new cut key into ignition cylinder and turn it to the ON position. The security light on the dash will light up and stay on for about ten minutes. When the security light goes out, you have one minute to start the next step.
2. Turn the ignition cylinder to OFF and then back to the ON position. The security light on the dash will illuminate and stay on for ten more minutes. When the security light goes out, you have one minute to start the next step.
3. Turn the ignition cylinder to OFF and then back to the ON position. The security light on the dash will illuminate and stay on for ten more minutes.
4. After the security light has gone off for the third time, turn key off and remove from ignition. The key is now programmed and all other keys have been erased.
5. Insert key and start vehicle to test key.

TO ADD AN EXTRA KEY (you must have at least one working key)

1. Insert an existing programmed working key into the ignition cylinder.
2. Turn ignition to the ON position for 5 seconds, then back to OFF position.
3. Remove the existing key and within 5 seconds insert new key and turn it to the ON position for 5 seconds.
4. Turn key OFF then back to ON. The key is now programmed. Start vehicle to test the key.